Modern, flexible, lightweight oscilloscope. In addition to traditional applications, this oscilloscope is well suited for capturing single events – a short click in a microphone, a pulse from a geophone. The oscilloscope can show the signal one full screen width before the trigger event occurred.
The Oscilloscope has a large 8” color display and VGA connectors for direct viewing on the external monitor or projector. In addition, the oscilloscope has built-in frequency counter, can make differential calculations along both axes, and can display the frequency spectrum with FFT. With USB interface for PC and USB key, the measurements can easily be moved to a PC for presentation or further processing.
Bandwidth: 60 MHz
Sample Rate: 500 MS/s
Vertical scale: 5 mV/div - 5 V/div
Horizontal scale: 5 ns/div - 100 s/div, XY mode
Cursors (optional): 2 horizontal or 2 vertical
Trigger Mode: Auto, Normal, Single
Trigger Types: Edge, Pulse, Video, Slope, Alternate
Measured parameters (optional): Period, frequency, rise time, fall time, pos. & neg. pulse width, duty cycle, delay, Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, preshoot, overshoot, Vavg, Vrms. (See figure.)
Mathematical functions (optional): Add, subtract, multiply, divide, FFT
Signal averaging (optional): 1, 4, 16, 64, 128 traces
Display type: 8”, TFT, 65535 colours
Display resolution: 800 x 600 pixels
Mains voltage: 100 – 240 V AC, 50/60 Hz
Power consumption (max): 15 W
Dimensions: (B × D x H): 348 × 170 × 78 mm
Weight: 1.5 kg
Two x1/x10 probes included.
In order to connect lab leads with safety plugs or banana plugs to the BNC sockets of the oscilloscope, use adapter 111005 (purchased separately). With three adapters, every situation is covered. As an alternative, you can use cable 110002 which has a BNC plug at one end and two safety plugs at the other.